You can add/remove Appender programmatically to Log4j:
ConsoleAppender console = new ConsoleAppender(); //create appender
//configure the appender
String PATTERN = "%d [%p|%c|%C{1}] %m%n";
console.setLayout(new PatternLayout(PATTERN));
console.setThreshold(Level.FATAL);
console.activateOptions();
//add appender to any Logger (here is root)
Logger.getRootLogger().addAppender(console);
FileAppender fa = new FileAppender();
fa.setName("FileLogger");
fa.setFile("mylog.log");
fa.setLayout(new PatternLayout("%d %-5p [%c{1}] %m%n"));
fa.setThreshold(Level.DEBUG);
fa.setAppend(true);
fa.activateOptions();
//add appender to any Logger (here is root)
Logger.getRootLogger().addAppender(fa);
//repeat with all other desired appenders
I’d suggest you put it into an init() somewhere, where you are sure, that this will be executed before anything else.
You can then remove all existing appenders on the root logger with
Logger.getRootLogger().getLoggerRepository().resetConfiguration();
and start with adding your own. You need log4j in the classpath of course for this to work.
Remark:
You can take any Logger.getLogger(...) you like to add appenders. I just took the root logger because it is at the bottom of all things and will handle everything that is passed through other appenders in other categories (unless configured otherwise by setting the additivity flag).
If you need to know how logging works and how is decided where logs are written read this manual for more infos about that.
In Short:
Logger fizz = LoggerFactory.getLogger("com.fizz")
will give you a logger for the category “com.fizz”.
For the above example this means that everything logged with it will be referred to the console and file appender on the root logger.
If you add an appender to
Logger.getLogger(“com.fizz”).addAppender(newAppender)
then logging from fizz will be handled by alle the appenders from the root logger and the newAppender.
You don’t create Loggers with the configuration, you just provide handlers for all possible categories in your system.