Calculate Segment:Offset from absolute address

by

You would be required to have either the base or the offset to start with, along with the linear address, as multiple Segment:Offset pairs can map to the same linear address.

so if we have the segment 0xF400 and the linear address 0xF4170, we get the offset being 0xF4170 - (0xF400 << 4) which is 0x170.

Doing this with only knowing the linear address doesn’t have a unique solution, so you have to choose a convention for splitting a 20-bit address into a 16-byte-aligned seg part and a byte offset. One possible function is this:

  • Segement = linear >> 4 (top 16 bits)
  • offset = linear & 0x0F (low 4 bits)

You might choose a canonical form with 12:8 bits, leaving room for future expansion with wider linear addresses.

More Related Contents:

  1. What are the segment and offset in real mode memory addressing?
  2. What’s the purpose of the LEA instruction?
  3. Boot loader doesn’t jump to kernel code
  4. 8086 assembly on DOSBox: Bug with idiv instruction?
  5. NASM x86 16-bit addressing modes [duplicate]
  6. Displaying numbers with DOS
  7. What is the “FS”/”GS” register intended for?
  8. Assembly, printing ascii number
  9. Assembly 8086 | Sum of an array, printing multi-digit numbers
  10. How buffered input works
  11. Displaying Time in Assembly
  12. What does “DS:[40207A]” mean in assembly?
  13. Converting bin to hex in assembly
  14. Random number in emu8086 without using DOS/BIOS calls?
  15. Calculating padding length with GAS AT&T directives for a boot sector?
  16. Differences between general purpose registers in 8086: [bx] works, [cx] doesn’t?
  17. Why is my assembly output in letter position? (1+1=b)
  18. 8086 random number generator (not just using the system time)?
  19. Why can’t MOV have both operands as memory locations? [closed]
  20. Jump out of range solutions and how different instructions affect range
  21. Assembly with %include at the top – Printing Outputs Unexpected Result: just an ” S”
  22. What is the purpose of segment registers in x86 protected mode?
  23. Segment size in x86 real mode
  24. Enable the boot loader to load the second sector of a USB
  25. Cannot move 8 bit address to 16 bit register
  26. Is a mov to a segmentation register slower than a mov to a general purpose register?
  27. BIOS int 10h printing garbage on QEMU
  28. Why mov/cmp instead of cmp with two memory operands? [duplicate]
  29. MUL function in assembly
  30. How many ways to set a register to zero?

Leave a Comment