How to effectively use the `-Filter` parameter on Active Directory cmdlets?

by

Note about Azure AD cmdlets

This answer is crafted around the Active Directory cmdlets installed and available from Remote Server Administration Tools (RSAT). However, the Azure AD cmdlets make use of Microsoft Graph (OData v4.0 specification) to run queries against Azure AD while the RSAT cmdlets[1] rely on an implementation of the PowerShell Expression Engine intended to replace LDAP filters.

As such, the filter examples below will not work with Azure AD cmdlets without some modification to be compatible with the Microsoft Graph specification, specifically, its filter syntax. However, the general practices mentioned here should still apply.

[1] – This is the most recent version of this document I could find.

What is so bad about -Filter *?

You are effectively selecting and returning every object that exists in AD, based on the cmdlet you are using (e.g. Get-ADUser, Get-ADComputer, Get-ADGroup, the generic Get-ADObject, etc.). This is an expensive thing to do, especially in larger AD environments. In large enough environments you will want to split up your queries in batches, even if you legitimately need to operate on every AD object of a given type. On top of this, your script will end up processing far more data than it needs to, increasing execution time and used processing time when it just isn’t necessary.

The -Filter parameter can do more than just match on everything, which is effectively what
-Filter * does. The -Filter string is very much like Powershell syntax (not quite, but most of the way there). You can use most of the same logical operators that Powershell supports, and they work much in the same way that Powershell operators do. This answer aims to clarify this and explain how to use this elusive parameter. These examples will use the Get-ADUser cmdlets but this also extends to the other Get-ADObject cmdlets which use filters as well.

Syntax

The syntax for the -Filter string is "PropertyName -comparisonoperator 'somevalue'", though you can string multiple conditions together with logical operators such as -and and -or. Note that there are no regex matching operators, so you will have to make do with -like and
-notlike globbing.

Comparison Operators

MS calls these FilterOperators but they are used in the same way as
PowerShell’s comparison operators are (ignoring the fact that technically -bor and -band are arithmetic operators). These are used for comparing values:

Note: AD attributes in DistinguishedName format will not have globbing applied when
-like or -notlike are used, in other words you have to look for an exact match. If you need a DN to match any pattern, this cannot be performed with -Filter or
-LDAPFilter. You will have to -Filter where you can, and perform additional processing with the -like or -match operators once your Get-ADObject cmdlet returns.

-eq, -le, -ge, -ne, -lt, -gt, -approx, -bor, -band, -recursivematch, -like, -notlike

The only ones which are unique to the -Filter query syntax are -approx and
-recursivematch. Don’t worry about -approx, it is functionally equivalent to -eq in Active Directory.

Despite its name, -recursivematch is not a regex matching operator, it works like PowerShell’s
-contains operator in that it will return $true if the collection contains the target value.

Logical Operators

MS calls these JoinOperators but they fill the same role as their PowerShell logical operator equivalent. These are used to join multiple conditions together in a single query:

-and, -or

Strangely enough, MS gives negation to a special operator type called NotOperator, which consists of a single operator:

-not

Matching on a property

To use the example in the question, let’s find a user matching an email address, but without piping to Where-Object (crazy right???):

$email="[email protected]"
Get-ADUser -Filter "EmailAddress -eq '${email}'"

Done. Get-ADUser will return any accounts where the EmailAddress property equals whatever the $email variable is.

What if we want to find all user accounts that haven’t been logged onto in the last 30 days? But a date string is more complex than an email! Who cares, still pretty simple!

# Get the date from 30 days ago

$notUsedSince = ( Get-Date ).AddDays( -30 )
Get-ADUser -Filter "LastLogonDate -lt '${notUsedSince}'"

This returns all users who have not logged on in the last 30 days.

Getting users who are members of a group

If you want to get all ADUsers who are members of a certain group, we can make use of the
-recursivematch operator for this:

Get-ADUser -Filter "memberOf -recursivematch 'CN=test_group,CN=Users,DC=exampledomain,DC=net'"

memberOf is an array of Distinguished Names, -recursivematch returns true if the array on the lefthand side contains the value on the righthand side.

You can alternatively avoid the use of Get-ADUser at all in this scenario and use Get-ADGroup to retrieve the members from that:

( Get-ADGroup group_name -Properties Members ).Members

While the Get-ADGroup example above is shorter to type, filtering on memberOf with
Get-ADUser can be effective when you have multiple conditions and need to return users that are members of a group, but not necessarily need to return the group for local processing. It may be interactively inconvenient but it is a worthy technique in any automated process integrating with Active Directory and may become necessary in cases where you have extremely large groups.

One example is when enumerating Domain Users in a very large domain. You might want to rethink returning 32,000 users from ( Get-ADGroup ).Members to then have to apply additional filtering.

Note: Most users will actually have Domain Users set as their PrimaryGroup. This is the default and most times this doesn’t need to be changed. However, you must use
-Filter on PrimaryGroup instead as the PrimaryGroup is not stored under MemberOf for an ADUser. It is also a single value, not a collection, so use -eq:

Get-ADUser -Filter "PrimaryGroup -eq 'PRIMARY_GROUP_DN'"

What if the query term contains a quote?

Quotes in the query term will throw a wrench in your query in most cases. Consider the example of searching for users with O'Niel in the name. This can break either the query or your script logic depending on the quoting technique used:

# Our heroic search term
$term = "O'Niel"

# Dragons abound (results in a query parsing error)
Get-ADUser -Filter "Name -like '*${term}*'"

# Your princess is in another castle ($term is not expanded
# and the literal string ${term} is instead searched for) 
Get-ADUser -Filter 'Name -like "*${term}*"'

In this case you will have to use double-quoted strings in both places, but fortunately the escape-hell isn’t too bad. Using the same value for $term as before:

# Your quest is over (this works as intended and returns users named O'Niel)
Get-ADUser -Filter "Name -like ""*${term}*"""

# Backticks are ugly but this also works
Get-ADUser -Filter "Name -like `"*${term}*`""

Note: If your query looks for a field value which contains both single and double quotes, I’m not sure how to facilitate this with one command when using the -Filter parameter. However, -LDAPFilter should be able to facilitate this, as parentheses (), not quotes, are used for the internal query bounds. See the Filter Examples in about_ActiveDirectory_Filter and the LDAP Filters section of this AD Escape Characters post for more information, as -LDAPFilter is beyond the scope of this answer.

Matching on multiple properties

Matching on multiple properties is not much different, but it’s best to wrap each condition in parentheses (). Here’s an example, let’s find non-domain admin accounts (assuming we know this by the username nomenclature *-da) that don’t have an email address associated with them.

Get-ADUser -Filter "(samaccountname -notlike '*-da') -and (EmailAddress -notlike '*')"

This one is a little trickier, because we can’t pass in an empty value for the right side of a condition in the -Filter, as in the case for EmailAddress. But ‘*’ matches any non-empty value, so we can leverage that behavior with the -notlike comparison operator to find empty values for EmailAddress. To break down the filter, make sure that any accounts ending in -da aren’t matched by the filter, and then also only match accounts that do not have an EmailAddress value.

Things to avoid

  1. Don’t try to use a { ScriptBlock } for your filter parameters. Yes, we are all more comfortable with writing a ScriptBlock than worrying about building a string and making sure it’s escaped properly. There is definitely an attraction to using them. I’ve seen so many answers using a ScriptBlock as a -Filter argument, or people having problems (myself included) trying to do something like this, and SURPRISE!!! Nothing gets returned:

    Import-Csv C:\userInfoWithEmails.csv | Foreach-Object {
  Get-ADUser -Filter { EmailAddress -eq $_.Email }
}

    -Filter doesn’t support ScriptBlocks, but they Kind of Work Sometimes™ because while they get rendered as a literal string, the PowerShell Expression Engine used by -Filter is capable of rendering your variables before running the query. Because of this, they will technically work if you use simple variable expansion like $_ or $emailAddress, but it will eventually cause you a headache, especially if you try to access an object property (like above) because it simply won’t work.

    In addition, you get largely undocumented (or difficult to locate info) behavior for how these variables are expanded, because they are not always ToString'd like you would expect. Figuring it out becomes a trial-and-error affair. Some attributes are admittedly easier to obtain this way, but using techniques you don’t understand and which have little documentation is a risky move when programming. Because of this, I don’t relying on the cmdlet-internal variable expansion that occurs whether you use a literal string or a ScriptBlock with the AD cmdlets.

    Use a string filter every time, and if you need to use a variable value or object property as a portion of the filter, use Variable Substitution or Command Substitution.

  2. You do not need to specify additional -Properties if you only care about a property to filter on it. The AD cmdlets can evaluate all properties within the -Filter parameter without needing to pass them down the pipeline.

  3. And while I’m at it, don’t ever use -Properties *, excepting maybe if you are inspecting all properties on a returned object for some reason, such as during script development, or interactively you’re not quite sure what you’re looking for (note that not all attributes are returned by default).

    Only specify the properties you need to process after the AD object has been returned. There is a reason for this – some properties are particularly expensive to get the values for. Best practice is to only forward the properties you need to process down the pipeline.

  4. You cannot use the -Filter parameter to filter on Constructed Attributes using either
    -Filter or -LDAPFilter. This is because constructed attributes are, by definition, computed (or “constructed”) on the fly, and are not actually stored values within Active Directory. I imagine it’s because many Computed Attributes are expensive to compute, which would have to be performed on every relevant ADObject to filter on it from the AD side.

    If you need to filter on Constructed Attributes, you will need to first return a set of ADObjects, specifying the Computed Attribute with -Properties, then further filter with Where-Object or some other technique.

  5. Wildcards * do not work for fields that return a DistinguishedName type, such as DistinguishedName, manager, PrimaryGroup, etc. In addition, DistinguishedNames carry their own set of escaping rules.

  6. Some AD attributes are returned as a proper DateTime for easier processing in PowerShell, but the basic time comparison exemplified above requires the underlying ADAttribute to be defined as the Interval type. Some time-based properties, such as whenCreated are defined as Generalized-Time strings, which are UTC timezone and formatted as yyyMMddHHmmss.Z. Additionally, some properties like
    msDS-UserPasswordExpiryTimeComputed are in file-time format (and is returned as such with the AD cmdlets).

    • Convert a target DateTime for filtering to the Generalized-Time string format like so:

      ( Get-Date ).ToUniversalTime().ToString('yyyMMddHHmmss.z').

      Note that this string is not directly convertible back to a DateTime.

    • Convert a returned file-time to a DateTime like so (using the aforementioned property as an example):

      [DateTime]::FromFileTime($adUser.'msDS-UserPasswordExpiryTimeComputed')

In summarium

These techniques using the -Filter parameter with the AD cmdlets will save you costly processing time when iterating over large AD environments, and should improve the performance of your Powershell AD operations. I hope this helps explain some of the elusive behaviors of the AD cmdlets’ -Filter parameter.

Additional Resources

As it is a good idea to understand the AD attributes you are working with, below are some Microsoft resources to help you identify and understand how different attributes are defined and function within the AD schema, as well as learn more about the -Filter syntax:

More Related Contents:

  1. Get-Aduser -Filter will not accept a variable
  2. Passing string in Get-ADUser filter parameter causes error – property not found in pscustomobject
  3. How remove accents in PowerShell?
  4. Replacing a string with a variable in Get-ADGroup
  5. Powershell script to see currently logged in users (domain and machine) + status (active, idle, away)
  6. Get-ADGroupMember : The size limit for this request was exceeded
  7. PowerShell says “execution of scripts is disabled on this system.”
  8. Create objects with custom properties containing derived filesystem path information and export them to a CSV – calculated properties
  9. What’s the best way to determine the location of the current PowerShell script?
  10. Using a Variable (PowerShell) inside of a command
  11. Changing PowerShell’s default output encoding to UTF-8
  12. PowerShell outputting array items when interpolating within double quotes
  13. PSCustomObject to Hashtable
  14. Get remote registry value
  15. What’s the difference between single quote and double quote to define a string in powershell
  16. Catching FULL exception message
  17. Powershell call msbuild with nested quotation marks
  18. Redirection of standard and error output appending to the same log file
  19. How can I get the file system location of a PowerShell script?
  20. How can I get the current PowerShell executing file?
  21. What’s the equivalent of xargs in PowerShell?
  22. You cannot call a method on a null-valued expression
  23. How do I call the PowerShell CLI robustly, with respect to character encoding, input and output streams, quoting and escaping?
  24. Powershell ConvertFrom-Json Encoding Special Characters Issue
  25. How to use a variable in each loop in Azure DevOps yaml pipeline
  26. Powershell Formatting for a String
  27. The response content cannot be parsed because the Internet Explorer engine is not available, or
  28. PowerShell FTP download files and subfolders
  29. Powershell: How can I stop errors from being displayed in a script?
  30. .SelectSingleNode in Powershell script using xPath not working on extracting values from web.config file

Leave a Comment