How can I compress (/ zip ) and uncompress (/ unzip ) files and folders with batch file without using any external tools?

by

And here are the answer(s):

1. Using “pure” batch script to zip/unzip file.

It’s possible thanks to Frank Westlake’s ZIP.CMD and UNZIP.CMD(needs admin permissions and requires FSUTIL and CERTUTIL) .For Win2003 and WinXP it will require 2003 Admin Tool Pack which will install CERTUTIL. Be careful as ZIP.CMD syntax is backward :

ZIP.CMD destination.zip source.file

And it can zip only single files.

2. Using Shell.Application

I’ve spent some time to create a single jscript/batch hybrid script for common usage that zips/unzips files and directories (plus few more features).Here’s a link to it (it became too big to post in the answer).
Can be used directly with its .bat extension and does not create any temp files.
I hope the help message is descriptive enough of how it can be used.

Some examples:

// unzip content of a zip to given folder.content of the zip will be not preserved (-keep no).Destination will be not overwritten (-force no)
call zipjs.bat unzip -source C:\myDir\myZip.zip -destination C:\MyDir -keep no -force no

// lists content of a zip file and full paths will be printed (-flat yes)
call zipjs.bat list -source C:\myZip.zip\inZipDir -flat yes

// lists content of a zip file and the content will be list as a tree (-flat no)
call zipjs.bat list -source C:\myZip.zip -flat no

// prints uncompressed size in bytes
zipjs.bat getSize -source C:\myZip.zip

// zips content of folder without the folder itself
call zipjs.bat zipDirItems -source C:\myDir\ -destination C:\MyZip.zip -keep yes -force no

// zips file or a folder (with the folder itslelf)
call zipjs.bat zipItem -source C:\myDir\myFile.txt -destination C:\MyZip.zip -keep yes -force no

// unzips only part of the zip with given path inside
call zipjs.bat unZipItem -source C:\myDir\myZip.zip\InzipDir\InzipFile -destination C:\OtherDir -keep no -force yes
call zipjs.bat unZipItem -source C:\myDir\myZip.zip\InzipDir -destination C:\OtherDir 

// adds content to a zip file
call zipjs.bat addToZip -source C:\some_file -destination C:\myDir\myZip.zip\InzipDir -keep no
call zipjs.bat addToZip -source  C:\some_file -destination C:\myDir\myZip.zip

Some known issues during zipping:

  • if there’s not enough space on the system drive (usually C:) the script could produce various errors , most often the script halts.This is due to Shell.Application actively uses %TEMP% folder to compress/decompress the data.
  • Folders and files that contain unicode symbols in their names cannot be handled by Shell.Application object.
  • Max supported size of produced zip files is around 8gb in Vista and above and around 2gb in XP/2003

The script detects if error message pops-up and stops the execution and informs for the possible reasons.At the moment I have no way to detect the text inside the pop-up and give the exact reason for the failure.

3. Makecab

Compressing a file is easy – makecab file.txt "file.cab" . Eventually MaxCabinetSize could be increased.
Compressing a folder requires a usage DestinationDir directive (with relative paths) for every (sub)directory and the files within .
Here’s a script:

;@echo off

;;;;; rem start of the batch part  ;;;;;
;
;for %%a in (/h /help -h -help) do ( 
;   if /I "%~1" equ "%%~a" if "%~2" equ "" (
;       echo compressing directory to cab file  
;       echo Usage:
;       echo(
;       echo %~nx0 "directory" "cabfile"
;       echo(
;       echo to uncompress use:
;       echo EXPAND cabfile -F:* .
;       echo(
;       echo Example:
;       echo(
;       echo %~nx0 "c:\directory\logs" "logs"
;       exit /b 0
;   )
; )
;
; if "%~2" EQU "" (
;   echo invalid arguments.For help use:
;   echo %~nx0 /h
;   exit /b 1
;)
;
; set "dir_to_cab=%~f1"
;
; set "path_to_dir=%~pn1"
; set "dir_name=%~n1" 
; set "drive_of_dir=%~d1"
; set "cab_file=%~2"
;
; if not exist %dir_to_cab%\ (
;   echo no valid directory passed
;   exit /b 1
;)

;
;break>"%tmp%\makecab.dir.ddf"
;
;setlocal enableDelayedExpansion
;for /d /r "%dir_to_cab%" %%a in (*) do (
;   
;   set "_dir=%%~pna"
;   set "destdir=%dir_name%!_dir:%path_to_dir%=!"
;   (echo(.Set DestinationDir=!destdir!>>"%tmp%\makecab.dir.ddf")
;   for %%# in ("%%a\*") do (
;       (echo("%%~f#"  /inf=no>>"%tmp%\makecab.dir.ddf")
;   )
;)
;(echo(.Set DestinationDir=!dir_name!>>"%tmp%\makecab.dir.ddf")
;   for %%# in ("%~f1\*") do (
;       
;       (echo("%%~f#"  /inf=no>>"%tmp%\makecab.dir.ddf")
;   )

;makecab /F "%~f0" /f "%tmp%\makecab.dir.ddf" /d DiskDirectory1=%cd% /d CabinetNameTemplate=%cab_file%.cab
;rem del /q /f "%tmp%\makecab.dir.ddf"
;exit /b %errorlevel%

;;
;;;; rem end of the batch part ;;;;;

;;;; directives part ;;;;;
;;
.New Cabinet
.set GenerateInf=OFF
.Set Cabinet=ON
.Set Compress=ON
.Set UniqueFiles=ON
.Set MaxDiskSize=1215751680;

.set RptFileName=nul
.set InfFileName=nul

.set MaxErrors=1
;;
;;;; end of directives part ;;;;;

Example usage:

call cabDir.bat ./myDir compressedDir.cab

For decompression EXPAND cabfile -F:* . can be used.For extraction in Unix cabextract or 7zip can be used.

4. .NET and GZipStream

I preferred a Jscript.net as it allows a neat hybridization with .bat (no toxic output , and no temp files).Jscript does not allow passing a reference of object to a function so the only way I found to make it work is by reading/writing files byte by byte (so I suppose it’s not the fastest way – how buffered reading/writing can be done?)Again can be used only with single files.

@if (@X)==(@Y) @end /* JScript comment
@echo off
setlocal

for /f "tokens=* delims=" %%v in ('dir /b /s /a:-d  /o:-n "%SystemRoot%\Microsoft.NET\Framework\*jsc.exe"') do (
   set "jsc=%%v"
)

if not exist "%~n0.exe" (
    "%jsc%" /nologo /out:"%~n0.exe" "%~dpsfnx0"
)

 %~n0.exe %*

endlocal & exit /b %errorlevel%


*/


import System;
import System.Collections.Generic;
import System.IO;
import System.IO.Compression;


    
    function CompressFile(source,destination){
        var sourceFile=File.OpenRead(source);
        var destinationFile=File.Create(destination);
        var output = new  GZipStream(destinationFile,CompressionMode.Compress);
        Console.WriteLine("Compressing {0} to {1}.", sourceFile.Name,destinationFile.Name, false);
        var byteR = sourceFile.ReadByte();
        while(byteR !=- 1){
            output.WriteByte(byteR);
            byteR = sourceFile.ReadByte();
        }
        sourceFile.Close();
        output.Flush();
        output.Close();
        destinationFile.Close();
    }

    function UncompressFile(source,destination){
        var sourceFile=File.OpenRead(source);
        var destinationFile=File.Create(destination);
        
        var input = new GZipStream(sourceFile,
            CompressionMode.Decompress, false);
        Console.WriteLine("Decompressing {0} to {1}.", sourceFile.Name,
                destinationFile.Name);
        
        var byteR=input.ReadByte();
        while(byteR !== -1){
            destinationFile.WriteByte(byteR);
            byteR=input.ReadByte();
        }
        destinationFile.Close();
        input.Close();
        
        
    }
    
var arguments:String[] = Environment.GetCommandLineArgs();

    function printHelp(){
        Console.WriteLine("Compress and uncompress gzip files:");
        Console.WriteLine("Compress:");
        Console.WriteLine(arguments[0]+" -c source destination");
        Console.WriteLine("Uncompress:");
        Console.WriteLine(arguments[0]+" -u source destination");
        
        
    }

if (arguments.length!=4){
    Console.WriteLine("Wrong arguments");
    printHelp();
    Environment.Exit(1);
}

switch (arguments[1]){
    case "-c":
    
        CompressFile(arguments[2],arguments[3]);
        break;
    case "-u":
        UncompressFile(arguments[2],arguments[3]);
        break;
    default:
        Console.WriteLine("Wrong arguments");
        printHelp();
        Environment.Exit(1);
}

Example usage:

//zip
call netzip.bat -c my.file my.zip
//unzip
call netzip.bat -u my.zip my.file

5. TAR (only for the newest windows builds)

With the latest builds of windows 10 now we have TAR command ,though it’s not the most backward compatible option:

//compress directory
tar -cvf archive.tar c:\my_dir
//extract to dir
tar -xvf archive.tar.gz -C c:\data
//compres to zip format
tar -caf archive.zip c:\my_dir

More Related Contents:

  1. How can I download a file with batch file without using any external tools?
  2. File / folder chooser dialog from a Windows batch script
  3. How can a .bat file be ‘converted’ to .exe without third party tools?
  4. Passing quotes in Process.Start arguments
  5. How do I determine the dependencies of a .NET application?
  6. Creating a ZIP archive in memory using System.IO.Compression
  7. How to specify the port an ASP.NET Core application is hosted on?
  8. Using .NET objects within a Powershell (V5) class
  9. Is there a way to call a stored procedure with Dapper?
  10. Making a WinForms TextBox behave like your browser’s address bar
  11. Windows update caused MVC3 and MVC4 stop working
  12. Find all child processes of my own .NET process / find out if a given process is a child of my own?
  13. .NET LINQ query syntax vs method chain
  14. Does .NET 4 have a built-in JSON serializer/deserializer?
  15. System.Runtime.InteropServices.COMException (0x800A03EC)
  16. Why are .NET property wrappers bypassed at runtime when setting dependency properties in XAML?
  17. How to Regex search/replace only first occurrence in a string in .NET?
  18. When to use IComparable Vs. IComparer
  19. What’s the ‘correct’ way of registering/installing an Assembly to the GAC?
  20. .NET Console TextWriter that Understands Indent/Unindent/IndentLevel
  21. What does Error-code 0xc0000135 (or -1073741515 Exit-code) mean when starting a Windows app?
  22. Given a private key, is it possible to derive its public key?
  23. Retrieving work items and their linked work items in a single query using the TFS APIs
  24. “Register for COM Interop” vs “Make assembly COM visible”
  25. SQL Connection Error: System.Data.SqlClient.SqlException (0x80131904)
  26. String manipulation with & or + in VB.NET
  27. JSON serialization of array with polymorphic objects
  28. Firebase .NET access
  29. How to get logged-in user’s full name in windows?
  30. Why do I get a warning icon when I add a reference to an MEF plugin project?

Leave a Comment