The simple way is to just read one byte, decode it and then determine if it’s a complete instruction. If not read another byte, decode it if necessary and then determine if a complete instruction has been read. If not continue reading/decoding bytes until the complete instruction is read.
This means that if the instruction pointer is pointing at a given sequence of bytes there’s only possible way to decode that first instruction of that sequence of bytes. The ambiguity only comes because the next instruction to be executed might not be located at the bytes immediately that follow the first instruction. That’s because the first instruction in the sequence of bytes may change the instruction pointer so some other instruction other than the following one gets executed.
The RET (retn) instruction in your example could be the end of a function. Functions often end with e RET instruction, but not necessarily so. It’s possible for a function to have multiple RET instructions, none of which are at the end of the function. Instead the last instruction will be some sort of JMP instruction that jumps back to some location in the function, or to another function entirely.
That means in your example code, without more context, it’s impossible to know if any of the bytes following the RET instruction will be ever be executed, and if so, which of the bytes would be the first instruction of the following function. There could be data in between functions or this RET instruction could be the end of the last function in the program.
The x86 instruction set in particular has a pretty complex format of optional prefix bytes, one or more opcode bytes, one or two possible addressing form bytes, and then possible displacement and immediate bytes. The prefix bytes can be prepended to just about any instruction. The opcode bytes determine how many opcode bytes there are and whether the instruction can have a operand bytes and immediate bytes. The opcode may also indicate that there’s displacement bytes. The first operand byte determines if there’s a second operand byte and if there’s displacement bytes.
The Intel 64 and IA-32 Architectures Software Developer’s Manual has this figure showing the format of x86 instructions:
Python-like pseudo-code for decoding x86 instructions would look something like this:
# read possible prefixes
prefixes = []
while is_prefix(memory[IP]):
prefixes.append(memory[IP))
IP += 1
# read the opcode
opcode = [memory[IP]]
IP += 1
while not is_opcode_complete(opcode):
opcode.append(memory[IP])
IP += 1
# read addressing form bytes, if any
modrm = None
addressing_form = []
if opcode_has_modrm_byte(opcode):
modrm = memory[IP]
IP += 1
if modrm_has_sib_byte(modrm):
addressing_form = [modrm, memory[IP]]
IP += 1
else:
addressing_form = [modrm]
# read displacement bytes, if any
displacement = []
if (opcode_has_displacement_bytes(opcode)
or modrm_has_displacement_bytes(modrm)):
length = determine_displacement_length(prefixes, opcode, modrm)
displacement = memory[IP : IP + length]
IP += length
# read immediate bytes, if any
immediate = []
if opcode_has_immediate_bytes(opcode):
length = determine_immediate_length(prefixes, opcode)
immediate = memory[IP : IP + length]
IP += length
# the full instruction
instruction = prefixes + opcode + addressing_form + displacement + immediate
One important detail left out of the pseudo-code above is that instructions are limited to 15 bytes in length. It’s possible to construct otherwise valid x86 instructions that are 16 bytes or longer, but such instruction will generate an undefined opcode CPU exception if executed. (There are other details I’ve left out, like how part of the opcode can be encoded inside of the Mod R/M byte, but I don’t think this affects the length of instructions.)
However x86 CPUs don’t actually decode instructions like how I’ve described above, they only decode instructions as if they read each byte one at a time. Instead modern CPUs will read an entire 15 bytes in to a buffer and then decode bytes in parallel, usually in a single cycle. When it fully decodes the instruction, determining its length, and is ready to read the next instruction it shifts over the remaining bytes in the buffer that weren’t part of the instruction. It then reads more bytes to fill the buffer to 15 bytes again and starts decoding the next instruction.
Another thing modern CPUs will do that’s isn’t implied by what I’ve written above, is speculatively execute instructions. This means the CPU will decode instructions and tentatively try to execute them even before it has finished executing the previous instructions. This in turn means that the CPU may end up decoding the instructions following the RET instruction, but only if it can’t determine where the RET will return to. Because there can be performance penalties from trying to decode and tentatively execute random data that’s not intended to be executed, compilers don’t normally put data in between functions. Though they may pad this space with NOP instructions that will never be executed in order to align functions for performance reasons.
(They used to put read-only data in between functions long ago, but this was before x86 CPUs that could speculatively execute instructions became common place.)